#include <src/sensors/YosemitechY700.h>
YosemitechY700
class
The Sensor sub-class for the Yosemitech Y700 pressure sensor.
Base classes
- class YosemitechParent
- The Sensor sub-class for all the Yosemitech sensors.
Constructors, destructors, conversion operators
- YosemitechY700(byte modbusAddress, Stream* stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)
- Construct a new Yosemitech Y700 object.
- YosemitechY700(byte modbusAddress, Stream& stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)
- Construct a new Yosemitech Y700 object.
- ~YosemitechY700()
- Destroy the Yosemitech Y700 object.
Function documentation
YosemitechY700(byte modbusAddress, Stream* stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)
Construct a new Yosemitech Y700 object.
| Parameters | |
|---|---|
| modbusAddress | The modbus address of the sensor. |
| stream | An Arduino data stream for modbus communication. See notes for more information on what streams can be used. |
| powerPin | The pin on the mcu controlling power to the Y700. Use -1 if it is continuously powered. |
| powerPin2 | The pin on the mcu controlling power to the RS485 adapter, if it is different from that used to power the sensor. Use -1 or omit if not applicable. |
| enablePin | The pin on the mcu controlling the direction enable on the RS485 adapter, if necessary; use -1 or omit if not applicable. |
| measurementsToAverage | The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1. |
YosemitechY700(byte modbusAddress, Stream& stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)
Construct a new Yosemitech Y700 object.
| Parameters | |
|---|---|
| modbusAddress | The modbus address of the sensor. |
| stream | An Arduino data stream for modbus communication. See notes for more information on what streams can be used. |
| powerPin | The pin on the mcu controlling power to the Y700. Use -1 if it is continuously powered. |
| powerPin2 | The pin on the mcu controlling power to the RS485 adapter, if it is different from that used to power the sensor. Use -1 or omit if not applicable. |
| enablePin | The pin on the mcu controlling the direction enable on the RS485 adapter, if necessary; use -1 or omit if not applicable. |
| measurementsToAverage | The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1. |
