#include <src/sensors/InSituRDO.h>
InSituRDO
class
The Sensor sub-class for the In-Situ RDO PRO-X dissolved oxygen sensor.
- Reference
- Detailed Descriptions
Base classes
- class SDI12Sensors
- The main class for SDI-12 Sensors.
Constructors, destructors, conversion operators
- InSituRDO(char SDI12address, int8_t powerPin, int8_t dataPin, uint8_t measurementsToAverage = 1)
- Construct a new In-Situ RDO object.
- InSituRDO(char* SDI12address, int8_t powerPin, int8_t dataPin, uint8_t measurementsToAverage = 1)
- Construct a new In-Situ RDO object.
- InSituRDO(int SDI12address, int8_t powerPin, int8_t dataPin, uint8_t measurementsToAverage = 1)
- Construct a new In-Situ RDO object.
- ~InSituRDO()
- Destroy the In-Situ RDO object.
Function documentation
InSituRDO:: InSituRDO(char SDI12address,
int8_t powerPin,
int8_t dataPin,
uint8_t measurementsToAverage = 1)
Construct a new In-Situ RDO object.
Parameters | |
---|---|
SDI12address | The SDI-12 address of the RDO; can be a char, char*, or int. |
powerPin | The pin on the mcu controlling power to the RDO PRO-X Use -1 if it is continuously powered.
|
dataPin | The pin on the mcu connected to the data line of the SDI-12 circuit. |
measurementsToAverage | The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1. |
The SDI-12 address of the sensor, the Arduino pin controlling power on/off, and the Arduino pin sending and receiving data are required for the sensor constructor. Optionally, you can include a number of distinct readings to average. The data pin must be a pin that supports pin-change interrupts.
InSituRDO:: InSituRDO(char* SDI12address,
int8_t powerPin,
int8_t dataPin,
uint8_t measurementsToAverage = 1)
Construct a new In-Situ RDO object.
Parameters | |
---|---|
SDI12address | The SDI-12 address of the RDO; can be a char, char*, or int. |
powerPin | The pin on the mcu controlling power to the RDO PRO-X Use -1 if it is continuously powered.
|
dataPin | The pin on the mcu connected to the data line of the SDI-12 circuit. |
measurementsToAverage | The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1. |
The SDI-12 address of the sensor, the Arduino pin controlling power on/off, and the Arduino pin sending and receiving data are required for the sensor constructor. Optionally, you can include a number of distinct readings to average. The data pin must be a pin that supports pin-change interrupts.
InSituRDO:: InSituRDO(int SDI12address,
int8_t powerPin,
int8_t dataPin,
uint8_t measurementsToAverage = 1)
Construct a new In-Situ RDO object.
Parameters | |
---|---|
SDI12address | The SDI-12 address of the RDO; can be a char, char*, or int. |
powerPin | The pin on the mcu controlling power to the RDO PRO-X Use -1 if it is continuously powered.
|
dataPin | The pin on the mcu connected to the data line of the SDI-12 circuit. |
measurementsToAverage | The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1. |
The SDI-12 address of the sensor, the Arduino pin controlling power on/off, and the Arduino pin sending and receiving data are required for the sensor constructor. Optionally, you can include a number of distinct readings to average. The data pin must be a pin that supports pin-change interrupts.