Tab / T to search, Esc to close

…

Search for symbols, directories, files, pages or topics. You can omit any prefix from the symbol or file path; adding a : or / suffix lists all members of given symbol or directory.

Use ↓ / ↑ to navigate through the list, Enter to go. Tab autocompletes common prefix, you can copy a link to the result using ⌘ L while ⌘ M produces a Markdown link.

Sorry, nothing was found.

#include <src/sensors/GroPointGPLP8.h>
GroPointGPLP8 class

The Sensor sub-class for the GroPoint Profile GPLP8 probe.

Base classes

class GroPointParent: The Sensor sub-class for all the GroPoint sensors.

Constructors, destructors, conversion operators

GroPointGPLP8(byte modbusAddress, Stream* stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1): Construct a new GroPoint GPLP8 object.
GroPointGPLP8(byte modbusAddress, Stream& stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1): Construct a new GroPoint GPLP8 object.
~GroPointGPLP8(): Destroy the GroPoint GPLP8 object.

Function documentation

GroPointGPLP8::GroPointGPLP8(byte modbusAddress, Stream* stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)

Construct a new GroPoint GPLP8 object.

Parameters
modbusAddress	The modbus address of the sensor.
stream	An Arduino data stream for modbus communication. See notes for more information on what streams can be used.
powerPin	The pin on the mcu controlling power to the GPLP-8. Use -1 if it is continuously powered.
powerPin2	The pin on the mcu controlling power to the RS485 adapter, if it is different from that used to power the sensor. Use -1 or omit if not applicable.
enablePin	The pin on the mcu controlling the direction enable on the RS485 adapter, if necessary; use -1 or omit if not applicable.
measurementsToAverage	The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1.

GroPointGPLP8::GroPointGPLP8(byte modbusAddress, Stream& stream, int8_t powerPin, int8_t powerPin2 = -1, int8_t enablePin = -1, uint8_t measurementsToAverage = 1)

Construct a new GroPoint GPLP8 object.

Parameters
modbusAddress	The modbus address of the sensor.
stream	An Arduino data stream for modbus communication. See notes for more information on what streams can be used.
powerPin	The pin on the mcu controlling power to the GPLP-8. Use -1 if it is continuously powered.
powerPin2	The pin on the mcu controlling power to the RS485 adapter, if it is different from that used to power the sensor. Use -1 or omit if not applicable.
enablePin	The pin on the mcu controlling the direction enable on the RS485 adapter, if necessary; use -1 or omit if not applicable.
measurementsToAverage	The number of measurements to take and average before giving a "final" result from the sensor; optional with a default value of 1.